Autodesk InventorCAM 2021 Build 8.0.0.20782 激活

April 17, 2020, 12:19 am

≫ Next: InventorCAM 2019 SP2 HF9 for Autodesk Inventor

≪ Previous: Apple Xcode 11.4.1 Stable for macOS 10.15.2 and later

Autodesk InventorCAM 2021 Build 8.0.0.20782 | 940.1 mb

The Autodesk CAM development team is pleased to announce the availability of InventorCAM 2021, is a powerful CAM software application designed to improve productivity and deliver seamless workflows in manufacturing environments so design teams can easily move components from the design stage through to CNC manufacture.
Autodesk CAM开发团队很高兴地宣布InventorCAM 2021是一款功能强大的CAM软件应用程序，旨在提高生产率并在制造环境中提供无缝的工作流程，因此设计团队可以轻松地将组件从设计阶段转移到CNC制造。

Autodesk InventorCAM 2021 Release Notes Build 8.0.0.20782 / 16 April 2020

Changes for Turning Profile Roughing
- Added the ability for inside turn profile roughing front to back toolpaths to retract to safe Z after every cutting pass. (#17388)
- For turn profile roughing with inside turning, cycle set to horizontal passes, direction set to front to back and use canned cycles checked off, added the ability for the tool to retract to Safe Z after every cutting pass. (#18515)
- Fixed an issue with certain turning profile roughing toolpaths with vertical passes that were gouging the front of the part. (#18952)
- Fixed an issue with turn profile roughing toolpaths where the tool was rapiding into model within the Z confinement limits. (#18846)
- Fixed an issue with certain inside turn profile roughing toolpaths that were violating the clearance radius. (#18727)
- Fixed a problem with certain turn profile roughing toolpaths that were entering a radial groove even when grooving was set to no grooving. (#18444, #19167)
- Fixed a bug where the toolpath would gouge through the part when "no grooving" is selected. (#17447)
- Fixed an issue where turn profile roughing and finishing toolpaths with Z or X limits set to contact point were not matching in terms of Z and X extents. (#18278)
- Fixed an issue with gouging for certain turn profile roughing toolpaths with vertical passes using a neutral holder. (#18164)
- Fixed an issue where the tool leaves material at the back of the model when limit is set to cutting edge. (#18053)
- Fixed an issue with gouging at the front with certain turning profile roughing toolpaths. (#18000)
- Fixed a bug where the tool would gouge if there is an area with a fillet of greater than 90 degrees. (#17995)
- Fixed an issue with gouging at the back Z limit for certain turning profile roughing toolpaths. (#17871)
- Fixed an issue with turn profile roughing with contact point Z limits where the toolpath created a horizontal move at the back of the part instead of a tangential move. (#17867)
- Fixed an issue with certain turning profile roughing toolpaths with a front tangential extension. (#17771)
- Fixed a problem with certain turning profile roughing toolpaths where retract moves were gouging the part. (#17668)
- Fixed an issue where certain profile roughing operations with a vertical passes cycle and direction set to both ways were not cutting the same amount of material as with other direction types. (#17484)
- Fixed an issue with turn profile roughing toolpaths with back to front horizontal passes where the contact point Z limit was not being calculated correctly. (#17448)
- Fixed issues with vertical passes where the axial and radial grooves are either cut when they shouldn't be or vice versa. (#17385)
- Fixed an issue with turning profile roughing operations with tool limit set to contact point that were not machining up to the correct limit. (#16964)
- Fixed an issue with certain turning profile roughing toolpaths with vertical passes and pecking turned on where the grooving parameter was not being respected. (#16731)
Changes for Turning Profile Finishing
- Fixed an issue with certain turn profile finishing toolpaths with multiple stepdowns where certain finishing passes were violating the Z limits. (#18710)
- Fixed an issue of gouging with certain turn profile finishing no drag toolpaths. (#18532)
Changes for Turning Grooving
- Fixed a problem with certain OD turning single groove operations with pecking turned on where the tool was ignoring the axial depth of cut and machining up to the inner limit. (#18685)
Changes for Turning Canned Cycles
- Added the ability to output in computer compensated NC code for turn profile roughing canned cycles. (#18920)
- Fixed a problem for an inside turning profile roughing toolpath with vertical passes and use canned cycles turned on where the simulation toolpath showed machining from outside to inside. (#17539)
Changes for File Save
- Fixed a crash that could occur in some situations when saving an assembly after working on CAM data. (#16845)
Changes for Installation
- Fixed an issue in which meaningless strings were sometimes displayed during installation on the Configure Installation page. (#9711)
- Fixed an issue with the application installer that resulted in a duplicate listing of the product in the Windows "Programs and Features" utility. (#17943)
Changes for Distributed CAM
- The Distributed CAM functionality has been removed due to a combination of lack of use and maintenance issues. (#19938)
Integrated Autodesk Inventor CAM software - For those that aren’t familiar with Computer Aided Manufacturing it is an approach that makes use of computer software to control machine tools and related machinery in the manufacturing of components.

Prior to CAM software, component machining was achieved via numerical control (NC) programming. This could be a very lengthy process and in modern design workflows where time to market is critical, traditional NC programming was often a bottleneck to early product launch.

The subsequent wider adoption of 3D CAD software such as Autodesk Inventor opened up a new realm of possibilities for CAM software and machining companies resulting in the growth of more intelligent CAM Software designed to bridge the gap between design and production.

Autodesk helps people imagine, design and create a better world. Everyone—from design professionals, engineers and architects to digital artists, students and hobbyists—uses Autodesk software to unlock their creativity and solve important challenges.

Product: Autodesk InventorCAM
Version: 2021 Build 8.0.0.20782 / 16 April 2020
Supported Architectures: x64
Website Home Page : www.hsmworks.com
Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size: 940.1 mb

* System Requirements:

- - Autodesk Inventor CAM 2021 supports Microsoft Windows 10 64-bit.
- Inventor CAM 2021 is compatible with the 2018, 2019, 2020 and 2021 versions of Inventor, Inventor Professional, and Inventor LT.

↧

InventorCAM 2019 SP2 HF9 for Autodesk Inventor

April 16, 2020, 9:58 pm

≫ Next: NeuraLog 2020.01

≪ Previous: Autodesk InventorCAM 2021 Build 8.0.0.20782 激活

InventorCAM is a new generation CAD / CAM system developed by Israeli firm SolidCAM Ltd (the Official Distributor in Russia - Consistent Software). This system is a complete solution for the automation of metal production. Using the wide range of strategies proposed by InventorCAM for turning, milling, turning-milling and electroerosive machining, the technologist can quickly prepare the necessary set of control programs for machining the product.
Functionality InventorCAM
Support for 64bit calculations due to the presence of a special version for 64bit:
2.5-axis milling
InventorCAM provides high efficiency and accuracy of 2.5-axis milling of parts. It supports various processing strategies for elements such as contour, sampling (with islands) and groove, as well as various types of hole machining: drilling, countersinking, thread cutting, etc. The system has a wide range of 2.5-coordinate machining capabilities for analytical surfaces........

InventorCAM无缝集成于Autodesk Inventor，为CNC编程提供最佳的CAM解决方案
你无需离开Inventor界面！
工作在现有的CAD系统：无缝集成于Autodesk Inventor
与Inventor的模型完全相关联：设计发生改变，相应的刀路也会自动更新。
消除导入/导出的挑战：节省大量的时间和避免错误
让你快速掌握：极短的学习周期，因为你已经熟悉Inventor的界面，SolidCAM与Inventor的界面相似，并运行在Inventor中
获得全部画面：SolidCAM在CAD装配工作模式下以图形方式显示夹具、刀具和虎钳的模拟仿真
在Inventor中使用InventorCAM的好处:
认证：自从2005年InventorCAM就被Autodesk Inventor认证为CAM合作伙伴
InventorCAM伴随着你成长：InventorCAM扩展性非常强，并支持全部CNC机床的应用
InventorCAM让您用最少的钱办最多的事：无缝集成的CAD/CAM解决方案- Inventor + InventorCAM更具有价格优势。

(回复可见内容)

↧

NeuraLog 2020.01

April 16, 2020, 9:04 pm

≫ Next: Autodesk Vehicle Tracking 2021 激活教程

≪ Previous: InventorCAM 2019 SP2 HF9 for Autodesk Inventor

NeuraLog是石油和天然气行业中使用最广泛的日志数字化解决方案。自动数字化通过向时间紧迫的项目发送可靠的数字数据来简化您的工作流程。独特的质量改进，编辑和验证确保您的数字日志数据（经常来自质量不确定的供应商）可以得到纠正和验证，以满足您的需求。对于使用栅格的人，NeuraLog可以为您的地质应用创建经过拉直和深度记录的图像。

数字化
解释旧日志可能会带来许多挑战，例如由于老化和处理而导致的性能下降，这会导致信息丢失和数据质量可变。

自动曲线跟踪-神经网络算法可快速，准确地跟踪曲线。有许多不同的曲线算法可用于解决许多数字化情况。

内置的网格模型可以解释穿过网格的曲线
自动停止错误检测
交互式曲线编辑，可立即恢复履历
岩性数据捕获-利用来自泥浆测井和岩性测井的数据。

从手绘泥浆记录中获取岩性和描述
独特的阶跃曲线捕获采样率（ROP，GAS）
记录注释以标记重要数据，例如区域，断层和储层
交互式日志显示-NeuraLog直接在计算机屏幕上显示日志光栅图像和跟踪的曲线矢量，从而提供即时反馈。

交互式跟踪工具和跟踪类型在跟踪过程中的任何时候进行纠错
在曲线跟踪过程中自动滚动日志
LAS和栅格的光表叠加
无限的备份比例尺-NeuraLog的自动跟踪功能适用于无限的备份比例尺，可自动将曲线的不同部分拼凑在一起，以简化曲线输出。

图像翘曲和拉伸校正-NeuraLog可以自动校正深度网格中的翘曲和拉伸，这是不良日志图像中的常见问题，可以自动生成高质量的日志图像和数字数据。

现已提供2020版：阅读我们的博客“卓越的工作流程体验”以获取更多信息。

NeuraLog是当今世界上最先进，使用最广泛的自动化测井数字化系统。 NeuraLog将扫描的图像转换为可用的数字数据。它的可靠性和质量控制工具通过授权测井分析人员控制测井数据的质量和可用性来提高生产率。自动跟踪通过简化工作流程为时间紧迫的项目创建可靠的数据，从而提高了生产率。独特的质量改进，编辑和验证，确保无论供应商或质量如何，您的数字日志数据都可以得到纠正和验证，以满足您的标准。对于那些使用光栅测井仪的人来说，NeuraLog可以为您的地质应用创建经过拉直和深度记录的图像。

NeuraLog使用更新的自动化工具解决了数字化问题，例如质量下降和可变数据格式，以确保将数据保留以供当前和将来的项目使用，以符合严格的公司和行业标准。

我们的项目资源管理器功能使您可以浏览和搜索所有项目，而不必离开当前正在处理的项目。它以树形结构列出所有项目并将其分组，以便用户可以一次快速浏览所有文件，而无需致力于更改为新项目。

项目浏览器将项目文件分为三类：
1.工作文件
2. LAS文件（从LAS文件夹自动填充）
3.图像文件

我们新的Smart Ribbon技术使Project Explorer可以“知道”您打开的文件类型，并根据文件类型自动切换工具栏选项卡。这项新技术使用户无需手动切换即可访问用于这些文件类型的工作流和工具。

我们的新版本NeuraLog旨在帮助您缩短学习曲线，提高生产率并简化工作流程，以准确地对测井数据进行数字化处理，并使您能够基于声音，质量控制的数字数据更快地做出决策。

您可能已经知道（也许这可以描述您）–新一代人正在进入石油和天然气行业。正如我们在Windows 10中所看到的那样，它们通常用于具有平铺或“功能区”界面的软件，而不是早期Windows版本中基于菜单的界面。许多软件包都采用了功能区界面，该界面已成为使用软件的标准方法。

在最新版本的NeuraLog中，我们添加了此功能区界面，使其具有更现代的外观，可以模仿Microsoft Office产品（几乎涉及到行业中的每个人）。该软件的改进将减少学习曲线，使新用户更容易快速熟练。

新的NeuraLog目前正在进行Beta测试，并将于2020年2月底全面发布。

因此，除了更现代，更易于使用的界面之外...

我们认为用户会喜欢New NeuraLog的以下7个原因：

1.项目浏览器

我们希望减少您每天所做的工作，因此我们创建了新的Project Explorer。

这项令人兴奋的新功能使您可以浏览所有项目，而不必退出当前正在处理的项目。它列出了组中的所有项目，因此您可以一次快速浏览所有文件而无需提交到变成一个新项目。

Project Explorer使用3种不同类型的文件进行操作：

1.工作文件

2. LAS文件（它会自动填充LAS文件夹）

3.图像文件

我们介绍了所谓的“智能色带技术”。

这意味着Project Explorer“知道”您打开的文件类型，并根据文件类型自动切换工具栏选项卡，因此您不必手动切换选项卡。每个选项卡都有其自己的功能区，其中包括适用于该文件类型的工具-在使用NeuraLog支持的多种文件类型时很重要。我们已命令功能区选项卡遵循直观的工作流程，通常将首先用于左侧分组的主要任务的工具，位于中心的编辑工具和用于右侧分组和捕获和修改信息的工具–但是，标签是完全可定制的，因此您可以以最适合您的方式组织它们！您还可以选择使用根据您自己的自定义操作顺序组织的工具来创建自己的选项卡。

功能区界面目前还促进了某些触摸功能，将来的NeuraLog更新将完全兼容触摸。

2.更准确的自动跟踪

为了最大限度地提高工作效率，我们提高了自动跟踪的准确性，减少了您返回和查看日志数据的需求。此改进解决了跟踪过程中的一些循环问题，并且我们更新了跟踪算法，因此用户应该有更轻松的跟踪体验。

3. OCR工具

键入可能很耗时，乏味且容易出错。使用新的OCR或“光学字符识别”功能，您可以提取文本（例如标题数据和注释），然后将其粘贴到其关联的字段中。这种新的工作流程可以大大减少将信息从图像获取到LAS出口的井属性所需的时间。 OCR对于在井记录中捕获备注以将其复制/粘贴到井属性或您打开的其他文档的备注部分中也很有用。

4. Ctrl +滚动

您可能熟悉“ Ctrl +滚动”作为在Google地图中放大和缩小的简便方法。我们已在New NeuraLog中添加了此功能，可让您更快地访问测井数据中感兴趣的区域。只需按住控制键，然后使用鼠标快速放大和缩小光栅图像即可。

5.增强的深度校准流程和改进的光栅校准工作流程

我们改进了深度校准流程，使其更加用户友好，从而简化了操作顺序。功能区上的每个工具下面都有一个用于修改和编辑该工具的选项菜单。我们还对栅格校准导出器进行了改进，以更好地支持Petra和Geographix栅格校准文件。

6.搜索工具

就像在Office产品中一样-如果您输入搜索词，New NeuraLog将拉出与该搜索词相关的所有按钮，工具和选项，从而在您不记得要查找的内容时消除了沮丧对于！

7.增强的帮助菜单

为了符合New NeuraLog几乎无摩擦的工作体验的承诺，我们对“帮助”菜单进行了增强，增加了一些新功能。现在，“帮助”菜单包括用户指南，详细介绍新界面功能和项目资源管理器的教程链接，可搜索的“热键”部分，因此您无需在手册中寻找它们，Web Meetings即可轻松连接屏幕与我们的支持团队共享会议，以使您尽快恢复工作，通过电子邮件发送支持的按钮，用于检查更新的按钮以及关于但

↧

Autodesk Vehicle Tracking 2021 激活教程

April 16, 2020, 5:18 pm

≫ Next: Autodesk InventorCAM Ultimate 2021 激活码教程

≪ Previous: NeuraLog 2020.01

Autodesk Vehicle Tracking 2020软件使从事运输或现场设计项目的政府机构和工程咨询公司的工程师，设计师和规划人员可以预测地评估车辆的运动。Vehicle Tracking 软件是车辆扫掠路径分析中一款全面的运输分析和设计解决方案。使用该软件，用户可以预测评估车辆在运输或场地设计项目上的移动。
该软件提供了集成的分析和仿真工具，可将其用作设计过程的一部分，从而使用户能够以可预测的方式评估转向车辆，轻轨车辆和飞机的运动，以及设计停车场和路口。
所有这些操作都是在熟悉的Autodesk AutoCAD环境中进行的，可以将其集成到一系列Autodesk软件中，包括AutoCAD Civil 3D，AutoCAD Architecture，AutoCAD Plant 3D，Autodesk AutoCAD Map 3D和Autodesk AutoCAD Utility Design软件。
多年来，Autodesk^®Vehicle Tracking 的影响力和功能范围一直在不断扩展；它现在不再是一个单一的程序，而是一套与交通运输领域相关的程序集合，包括转向车辆的车辆扫掠路径预测、轻轨车辆和飞机、停车布局设计和环形交叉口设计。

Autodesk Inc., is pleased to announce the availability of Vehicle Tracking 2021 software is a comprehensive transportation assessment and design solution for vehicle swept path analysis.

The power and range of features in Autodesk Vehicle Tracking have grown over the years; it is now no longer a single program but a suite of transportation-related programs that includes vehicle swept path prediction for steered vehicles, light rail vehicles and aircraft, parking layout design, and roundabout design.

New Features
Vehicle Tracking 2021 contains the following enhancement.

Enhancement
- Fixed an issue that occurred when switching a roundabout arm to be an entry or exit only.
Autodesk Vehicle Tracking 2021的功能
Vehicle Tracking中的设计和仿真工具与AutoCAD和Microstation环境集成在一起。
使用后掠路径分析可以加快规划和设计过程。
探索替代回旋处的设计方案，并评估安全性和标准合规性。
直接在CAD环境中对车辆路径进行动画处理。使用多个摄像机角度甚至记录功能来创建2D或3D动画。
在数分钟而不是数小时内布置停车场。快速放置行，自定义海湾和道路。使用夹点轻松编辑替代设计。
道路设计工具使用智能对象来帮助工程师按照各种国际设计标准创建和编辑回旋处的几何形状。
通过检查滑行，展台净空，后推演习，喷射爆炸安全区，地面服务车辆的进入等来分析空侧车辆运行的所有方面。
评估电车和其他轻轨车辆的运动。对大多数单轴或双轴多轴转向架以及悬挂单元的路径进行建模。

驾驶模式概述

在 Autodesk Vehicle Tracking 的完整版本中有六个驾驶模式：AutoDrive 圆弧、AutoDrive 方向角、手动驾驶、跟随、脚本和垂直间隙。每个模式都可直接从工具栏或下拉菜单访问。高级驾驶模式允许您插入停放车辆。

Vehicle Tracking 道路具有手动驾驶、跟随和脚本模式，但没有 AutoDrive 圆弧、AutoDrive 方向角、垂直间隙或动态编辑模式。但它具有“停车”模式。

Vehicle Tracking 轨道版本仅有一个驾驶模式，即“引导驾驶”。
新增功能
Vehicle Tracking 2021 包含以下增强功能。
增强

修复了将环形交叉口上分支切换为仅入口或仅出口时遇到的问题。

系统要求和技术细节
支持的操作系统：Windows 7/8 / 8.1 / 10
CPU：64位Intel或AMD多核处理器
内存（RAM）：4 GB RAM（建议8 GB）
硬盘空间：1 GB

(回复可见内容)

关于激活

0.Unzip/Unrar Start sfx installer and wait for the installation to start
  or mount ISO

1.Install Autodesk Vehicle Tracking 2021

2.Use as Serial 666-69696969, 667-98989898, 400-45454545 066-66666666 ..
  or anything matching those templates

3.Use as Product Key 955M1

4.Finish the installation & restart Autodesk Product
  Choose Enter a Serial

ACTIVATION : We suggest blocking outgoing traffic (faster and easier to activate)

5.Before clicking on Activate
  You have 2 options :
   - a) Disable Your network Card, pull the network cable out or block with firewall
     (this is just to disable online checks) it will tell you that an internet Connection is Required
     simply click on close and click on activate again

OR
   - b) Click on Activate and it will do an online check, simply click
     on close and click on activate again.

Choose option a or b.

6. Select I have an activation code from Autodesk

7.Once at the activation screen:
  start XFORCE Keygen with administrator rights

8.Click on Mem Patch (you should see successfully patched)

9.Copy the request code into the keygen and press generate

10.Now copy the activation code back to the activation screen and click Next
  You have a fully registered autodesk product

  You may get this message while your outgoing traffic is blocked, or you are off internet
  Your online activation request has returned an error (800c0005) which is not allowing your request to be processed using our automated systems.
  just Click Close

NB: Make sure you are running the Keygen as administrator from your HDD and with UAC off on Windows 7/8/10
    You can apply updates before or after activation

↧

Autodesk InventorCAM Ultimate 2021 激活码教程

April 16, 2020, 7:56 am

≫ Next: Autodesk Infraworks 2021 完美激活

≪ Previous: Autodesk Vehicle Tracking 2021 激活教程

Inventor CAM – Ultimate是针对Inventor的集成式2.5到5轴CAD / CAM编程解决方案。Autodesk Inventor HSM Pro功能强大的产品公司，具有Autodesk的能力，该解决方案以插件软件的形式在机械零件领域的CAD / CAM领域集成了软件，Inventor还提供了建模和仿真程序的所有功能，设计师，工程师和CNC程序员可以帮助他们直接将项目直接投入到汽车零件中。Autodesk Inventor HSM Ultimate也改变了inventor CAM
使用Autodesk Inventor HSM Pro，刀具路径（切削）模型2.5D，3D，3 + 2和5轴的所有优点都可以在指尖获得更好的性能。 HSM代表高速加工是指高速加工。目前这种应用由于Nqssh性能在包括汽车，模具设计，工业零件设计等各个行业中得到了越来越广泛的应用。

此软件包括：
标准铣削操作的刀具路径，包含 2D 粗加工、挖槽、钻孔、面加工和轮廓加工
用于正向和反向材料消除的仿真功能
基于 JavaScript 的可自定义的后处理器系统包含行业标准的后处理器
使用功能强大的 CNC 程序编辑器进行文件比较、程序段编号、文本编辑和注释移除
新功能介绍

当前更新（2021）中进行了以下更改：
车削轮廓粗加工的更改

新增了在每次切削走刀后进行车削轮廓内粗加工前后刀具路径以缩回到安全Z的功能。（＃17388）
对于内部车削的车削轮廓粗加工，将循环设置为水平走刀，将方向设置为从前到后，并使用固定的固定循环，增加了刀具在每次切削走刀后退回到Safe Z的能力。（＃18515）
修复了某些车削轮廓的零件车削用垂直走刀的粗加工刀具路径对零件的前部进行气刨的情况。（＃18952）
修复了车削轮廓粗加工刀具路径的问题，该刀具路径在Z限制范围内快速进入模型。（＃18846）
修复了某些内部车削轮廓粗加工刀具路径违反了间隙半径的问题。（＃18727）
修复了即使在切槽设置为不切槽的情况下，某些车削轮廓粗加工刀具路径也进入径向凹槽的问题。（＃18444，＃19167）
修复了一个错误，当选择“不开槽”时，刀具路径将贯穿零件。（＃17447）
修复了将Z或X极限设置为接触点的车削轮廓粗加工和精加工刀具路径在Z和X范围方面不匹配的问题。（＃18278）
修复了使用中立刀柄对某些车削轮廓的带有垂直走刀的粗加工刀具路径进行气刨的问题。（＃18164）
修复了将极限设置为切削刃时工具将材料留在模型背面的问题。（＃18053）
修复了某些车削轮廓粗加工刀具路径在正面进行气刨的问题。（＃18000）
修复了当圆角大于90度的区域时工具会被切伤的错误。（＃17995）
修复了某些车削轮廓粗加工刀具路径在后Z极限进行气刨的问题。（＃17871）
修复了带有接触点Z限制的车削轮廓粗加工的问题，该问题是刀具路径在零件背面创建了水平移动而不是切向移动。（＃17867）
修复了某些车削轮廓粗加工刀具路径带有前切向扩展的问题。（＃17771）
修复了某些车削轮廓粗加工刀具路径的问题，在这些路径中，缩回运动正在刨削零件。（＃17668）
修复了以下问题：某些具有垂直通过循环和两个方向的方向的轮廓粗加工操作无法切削与其他方向类型相同的材料。（＃17484）
修复了带有从后到前水平走刀的车削轮廓粗加工刀具路径的问题，该接触点的Z极限值未正确计算。（＃17448）
解决了垂直通过问题，即在不应该切割轴向和径向凹槽时将其切掉，反之亦然。（＃17385）
修复了在车削极限设置为接触点且未加工到正确极限的情况下进行车削轮廓粗加工的问题。（＃16964）
修复了某些车削轮廓粗加工刀具路径带有垂直走刀并在未考虑开槽参数的情况下打开啄孔的问题。（＃16731）
车削轮廓精加工的更改

修复了某些车削轮廓精加工刀具路径具有多个降级的问题，其中某些精加工走刀违反了Z限制。（＃18710）
修复了某些车削轮廓没有完成拖动工具路径的气刨问题。（＃18532）
车削槽的变化

修复了某些外径在打开啄孔的情况下单刀削孔而忽略了切削的轴向深度并加工到内部极限的问题，从而导致了某些外径。（＃18685）
固定循环车削的更改

增加了在车削粗加工固定循环中以计算机补偿的NC代码输出的功能。（＃18920）
修复了带有垂直走刀的车削轮廓粗加工刀具路径的问题，并启用了固定循环，其中模拟刀具路径显示了从外到内的加工。（＃17539）
文件保存的更改

修复了在处理CAM数据后保存装配时在某些情况下可能发生的崩溃。（＃16845）
安装变更

修复了在“安装安装”页面上的安装过程中有时显示无意义的字符串的问题。（＃9711）
修复了应用程序安装程序的问题，该问题导致Windows“程序和功能”实用程序中产品的重复列表。（＃17943）
分布式CAM的更改

由于缺乏使用和维护问题，分布式CAM功能已被删除。（＃19938）
以前的更新
可以在2020.1、2020.2和2020.3发行说明中找到以前版本（2020）的季度更新中包含的改进。
返回页首

系统要求
Autodesk Inventor CAM 2021支持Microsoft Windows

(回复可见内容)

↧

Autodesk Infraworks 2021 完美激活

April 16, 2020, 7:41 am

≫ Next: Autodesk HSMWorks Ultimate 2021 激活码教程

≪ Previous: Autodesk InventorCAM Ultimate 2021 激活码教程

Autodesk Infraworks 2021 | 2.7 Gb
Languages: Deutsch, English (GB), English (US), Español, Français, Italiano,
日本語, Português, Русский, 中文

The Autodesk development team is pleased to announce the availability of InfraWorks 2021 is an outstanding tool for aggregating data, visually evaluating design concepts, and communicating design intent. This release includes new and updated features, performance enhancements, known issues and fixes.

What's New in Autodesk InfraWorks 2021.0

Highlights

Corridor geometry from Civil 3D
We've significantly improved data exchange between InfraWorks and Civil 3D, so that you can use full corridor geometry from Civil 3D in your InfraWorks models. This also compliments the new Civil Structures workflow.
Unified DWG and IMX import
We've enhanced the import of IMX data to improve data exchange between Civil 3D and Infraworks.
Parametric Bridge Content
We've added more parametric bridge content from Autodesk Inventor for use in your InfraWorks civil structure projects
High DPI Scaling Support
We've added High DPI scaling support and enabled it in all InfraWorks models by default. (You can use Application Options to turn this new option off).
3D Model import improvements
We've enhanced geo-referenced 3D model import to display coordinate system and rotation values from imported 3D models, such as Revit models in FBX format. This also enables interactive placement for geo-referenced 3D models.

All New and Updated Features

Add-ins for Autodesk InfraWorks
- We've made improvements to the Autodesk Revit InfraWorks Updater to support civil structures workflows between InfraWorks, Autodesk Civil 3D and Autodesk Revit.
Autodesk Connector for ArcGIS
- You can now not only publish desired geometry and layer content to ArcGIS but also select attributes (and name them whatever you’d like as long as they adhere to ESRI naming conventions) when publishing InfraWorks content to the ArcGIS cloud environment. This new functionality is also available when exporting InfraWorks content to ESRI File Geodatabase format (FGDB). This provides you with more flexibility to restrict access to any sensitive information while publishing.
Civil Structures
- We've released a workflow for your civil structures that spans Autodesk Civil 3D, Autodesk InfraWorks, and Autodesk Revit. Check out the whole workflow here: Civil Structures workflow.
- We've also added the ability to have the bridge deck slope match the super elevation of an imported corridor from Civil 3D.
Collaboration
- We've enhanced support for data exchange between Autodesk InfraWork, Autodesk Civil 3D, and Autodesk Revit. Check out the Data Exchange section of the help for more information.
Data Exchange with Civil 3D
- We've added 38 rules to support mapping Civil 3D subassemblies and components to InfraWorks component roads.
- We added the Corridor Component Road road option to the InfraWorks Data Source Configuration dialog for imported Civil 3D road data. This allows you to use full Civil 3D corridor geometry in InfraWorks.
- We've enabled additional Grading options for corridor component roads, the new options being: No Surface Interaction or Extended Grading.
General
- All toolbar icons are restyled to support high DPI scaling and fun colors.
Road Design
- In the Application Options dialog, Unit Configuration page we have added 'US survey feet' as an option to the Type dropdown list on the Transportation tab. Previously station annotations were in International feet which caused a minor discrepancy between the station labels and the actual road data.
- In the Profile View when hovering the cursor over a non-editable gizmo on a PVI, BVC or EVC the cursor will be displayed as the "Forbidden" symbol.
- The effected "Add Curve" command is on the Road context menu. The command will be displayed on the menu as long as the cursor location can be projected onto a horizontal tangent of the selected road. This change allows the user to control the location of the PI of the curve being added using the cursor position. In previous versions the command was only displayed whn the cursor was over the centerline of the road which limited where the curve could be added.

Autodesk InfraWorks (2021.0 - April 2020 release)

General
Fixed an issue in the New Model dialog that was preventing coordinate system selection in the Settings tab when using InfraWorks with high display resolution.
Fixed an issue that caused items to appear in grayscale instead of color when pinning a toolbar action to the Quick Access menu bar.
We've added a warning message to notify you if your system is using outdated graphics card drivers.
Fixed an issue where the Model Properties dialog was cutting off the display of buttons on the bottom of the dialog.
ArcGIS
We resolved a data offset issue that occurred for models with unsupported coordinate systems when publishing data to an ArcGIS Portal.
Civil Structures
Fixed an issue where orbital navigation in your model was not available when the Publish Civil Structures dialog was open.
Fixes an issue where the pier diaphragm width attribute was not being properly translated into other languages for non-English (US) usage of InfraWorks.
Fixed an issue where part catalog names and tooltips were inaccurate after importing a part catalog into InfraWorks.
Drainage Design
Fixed an issue where the edit state for Pipeline features was not updating correctly.
Point Clouds
Fixed an issue where extracting linear features from point cloud data with the Cross Section View panel open would cause InfraWorks to unexpectedly close.
Fixed an issue where InfraWorks would unexpectedly close when importing improperly-formatted CSV data with the Point Cloud Image Lookup tool.
Road Design
Fixed an issue where coverage materials for corridor component roads were not supported for imported IMX data from Autodesk Civil 3D.
Fixed an issue that caused unexpected behavior when importing road models with horizontal and vertical alignments of different lengths from Autodesk Civil 3D.
Fixed an issue where Right of Ways could be created with invalid self-intersecting geometry when using the Parallel Drawing.
Fixed an issue where the right-click context menu for selected component roads was too narrow to display all text.
Autodesk InfraWorks is the geospatial and engineering BIM platform that enables parametric model-based planning and design of civil infrastructure in the context of the real-world. With InfraWorks users can more easily evaluate and convey design intent within the context of a project’s surroundings; data can be aggregated from various sources and design decisions made earlier in the project lifecycle;~ then, the design model can be moved downstream to AutoCAD Civil 3D for detailed design and construction documentation with minimal loss of critical information – improving decision making, project stakeholder buy-in, and saving both time and money.

The latest release of InfraWorks now uses the power and precision of Civil 3D for corridor models. These upgrades include:

- Importing all calculated design elements or select elements of the Civil 3D corridor intoInfraWorks directly
- Define the mapping of materials to apply to the corridor shapes
- Placing corridors into their contextual environment
- Seamless updates to the road in InfraWorks when the Civil 3D corridor changes
- And more downstream benefit

What's New in InfraWorks (2021): Corridor Enhancements

Autodesk helps people imagine, design and create a better world. Everyone—from design professionals, engineers and architects to digital artists, students and hobbyists—uses Autodesk software to unlock their creativity and solve important challenges.

Product: Autodesk InfraWorks
Version: 2021
Supported Architectures: x64
Website Home Page : www.autodesk.com
Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Size: 2.7 Gb

* System Requirements:

System requirements for Autodesk InfraWorks 2021

Operating System Microsoft Windows 10 64-bit Enterprise or Pro
Processor Dual-core Intel Core 2 or equivalent AMD processor (Quad-core Intel Core i7, 6-core Intel Xeon, or better processor highly recommended); to use the ray traced rendering functionality, CPU must support SSE 4.1
Memory 8 GB RAM minimum (16+ GB recommended)
Display Resolution 1,280 x 720 or greater (1,440 x 900+ recommended)
Display Card Any DirectX 10.1 capable graphics card with 2 GB (or more) graphics memory, supporting 8x Antialiasing (8x AA), such as NVIDIA Quadro 5000 or 6000 for desktops and NVIDIA Quadro 2000M or GeForce GT 650M for laptops; (Any DirectX 10.1 capable graphics card with 1 GB graphics memory supporting 2x antialiasing (2x AA) minimum)
Disk Space 16 GB
Pointing Device MS-Mouse compliant
Media DVD or download file
Browser Google Chrome (latest), or Firefox (latest)
.NET Framework Internet connection for full online help and learning materials accessibility and Autodesk Cloud services

(回复可见内容)

↧

Autodesk HSMWorks Ultimate 2021 激活码教程

April 16, 2020, 7:30 am

≫ Next: 连续灌水，继续赚电魂

≪ Previous: Autodesk Infraworks 2021 完美激活

HSMWorks是CAM和SolidWorks软件集成解决方案的强大插件。该程序提供的功能将最终提高您的生产率。该插件可在SolidWorks建立的模型与加工过程之间建立良好的沟通和协调。当您更改模型的设计时。同时，这些更改将自动反映在模型图和刀具路径上。由于该程序具有并行处理的优势。在具有多核处理器的系统上使用它会非常高效，因为该软件会同时使用所有可用的处理核，从而最大程度地提高了计算速度。
使用优化策略，此插件可将剪切损失降至最低，并且最终剪切路径将是最佳的。该插件安装在SolidWorks环境中，因此，除了此插件的功能之外，您还具有SolidWorks软件的基本功能，例如，模型分析和可能的碰撞检测，零件之间压力的分析以及... SolidWorks环境提供的功能。。该插件支持用于各种CNC机器的各种代码，提供用于查看和评估模型的工具，并允许您模拟铣削，钻孔和切割操作等。

通过CAD / CAM集成简化加工工作流程
设计和生成CAM工具路径，而无需更改软件。利用CAD嵌入的2.5到5轴铣削，车削和车削功能，以减少周期时间和返工。 HSMWorks包含在您的Fusion 360订阅中。
用于铣削和钻孔的2.5轴CAM
Autodesk HSMXpress是一个免费的SOLIDWORKS插件，用于基本铣削，包括2D粗加工和型腔，钻孔，面，轮廓等。

HSMWorks功能
视频：集成CAD / CAM
集成的CAD / CAM
与SOLIDWORKS的完全集成使您可以在与功能强大的设计工具连接的熟悉界面中工作。（视频：55秒）

视频：2.5和3轴铣削
2.5和3轴铣削
HSMWorks包括全套的2.5轴和3轴铣削策略，以最大限度地提高生产率。（视频：1分25秒）

视频：3 + 2和同步5轴
3 + 2和同时5轴
易于使用的多轴编程可减少机器设置时间并缩小功能公差。（视频：1：59分钟）

视频：AnyCAD连接
AnyCAD连接
将您的SOLIDWORKS文件关联到Fusion 360，从而解除对高级设计工具的访问。（视频：3：28分钟）

什么是新的
机器模拟
通过仿真预览机床的运动，包括主轴，夹具和机床组件。

车削和铣削
通过一致的工作流程快速编程从简单的2轴到铣削车削策略的车削操作。
HSMWorks软件的功能：

铣削的可能性2。2.5D
优化耗材数量并减少最终浪费
能够对CNC机器使用几种不同的代码
能够模拟和评估结果
能够模拟刀具路径
能够进行钻井和钻井作业
3D，3 + 2和5轴加工能力

The Autodesk CAM development team is pleased to announce the availability of HSMWorks CAM 2021, is a powerful CAM software application designed to improve productivity and deliver seamless workflows in manufacturing environments so design teams can easily move components from the design stage through to CNC manufacture.

Autodesk HSMWorks 2021 Release Notes Build 15.0.0.43758 / 16 April 2020:
Changes for Turning
- Fixed an issue in which simulation incorrectly showed a gouge for some turning toolpaths during simulation. (#18124)
Changes for (Machine Definitions)
- Fix a crash that could occur when exiting SolidWorks after working on a part with CAM data. (#20478)
Changes for Installation
- There are no longer separate installers for HSMWorks Premium/Ultimate 2021 and HSMWorks Fusion Entitlement 2021. Use the same installer for all three products. (#18341)
- Fixed an issue in which HSMWorks Premium could not be activated for certain license types after installing from the Autodesk Desktop Application. (#14359)
- Fixed an issue with the application installer that resulted in a duplicate listing of the product in the Windows "Programs and Features" utility. (#17943)
Changes for Distributed CAM
- The Distributed CAM functionality has been removed due to a combination of lack of use and maintenance issues. (#19938)
Changes for Posting
- HSMEdit has been updated to version 8.7.13. (#19729)
所需系统
操作系统建议使用
Windows 10
Windows 8
Windows 7
Windows Vista Windows
64位（x64）版本。
CAD系统
2018年：
SolidWorks 2015、2016、2017和2018
2019年
软件先决条件：与SOLIDWORKS 2016或更高版本兼容
浏览器
Internet Explorer 8或更高版本。
CPU类型
采用SSE2技术的Intel®Pentium®4或3.0 GHz或更高的AMD Athlon™双核。
内存
在32位操作系统上：2GB。处理复杂零件时，建议使用4 GB或更大的容量。
在64位操作系统上：4GB。
真彩色显示分辨率 1,024 x 768（建议使用真彩色显示分辨率 1,600 x 1,050）
硬盘
安装6 GB
图片

(回复可见内容)

Autodesk helps people imagine, design and create a better world. Everyone—from design professionals, engineers and architects to digital artists, students and hobbyists—uses Autodesk software to unlock their creativity and solve important challenges.
Product: Autodesk HSMWorks
Version: 2021 Build 15.0.0.43758
Supported Architectures: x64
Website Home Page : www.hsmworks.com
Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size: 958.6 mb

* System Requirements:

- Autodesk HSMWorks 2021 supports Microsoft Windows 10 64-bit.
- HSMWorks 2021 is compatible with the 2018, 2019, and 2020 versions of SOLIDWORKS.

↧

连续灌水，继续赚电魂

April 17, 2020, 9:07 pm

≫ Next: 连续灌水，赚电魂

≪ Previous: Autodesk HSMWorks Ultimate 2021 激活码教程

操作过于频繁

↧

连续灌水，赚电魂

April 17, 2020, 9:05 pm

≫ Next: nanoSoft nanoCAD СКС v11.0.5040.5040

≪ Previous: 连续灌水，继续赚电魂

害，忙碌的一天

↧

nanoSoft nanoCAD СКС v11.0.5040.5040

April 18, 2020, 7:13 am

≫ Next: JetBrains Rider 2020.1 激活码

≪ Previous: 连续灌水，赚电魂

nanoCAD SCS专为各种用途的建筑物和结构化布线系统（SCS）的计算机辅助设计而设计。

nanoCAD SCS使您可以解决以下问题：
合并项目信息；
建立电缆通道系统；
水平子系统设计；
主楼子系统的设计；
地板和建筑物分配点的设计；
建筑物主干电缆和电话通道的设计；
自动电缆布线；
自动准备报告文件（规格，电缆杂志，装配体布置图，结构图）。
主要特点：
设备规格根据GOST自动生成并上传；
根据GOST自动生成和上传三种类型的有线电视杂志；
自动生成安装结构的布局；
自动生成的建筑电缆系统连接框图；
根据工作场所的端口数量，以自动模式用面板填充安装结构；
自动为工作标记附加标注；
在项目的各种变更中自动标记在领导者和报告文件中显示的设备；
与SKS设备制造商的数据库一起工作；
UGO数据库已开放，可以进行编辑和添加新名称；
建立几乎任何复杂的电缆渠道系统；
自动选择和计数电缆通道的连接元件（角，弯曲等）以及桥架的连接点；
根据敷设的电缆数量计算电缆通道的容量；
创建建筑物的水平子系统和干线子系统的连接（下载示例）；
在水平平面和垂直方向以及位于不同DWG文件中的楼层之间的电缆跟踪；
设置整个项目的电缆计数的附加系数，以及水平子系统的电缆长度的单独设置；
具有各种提示的智能程序对象；
下载报告文档时可以选择软件的功能-Microsoft Office或OpenOffice.org；
输出到规格时可以选择电缆和电缆通道的度量单位的能力。

(出售内容)

↧

JetBrains Rider 2020.1 激活码

April 18, 2020, 5:01 am

≫ Next: 推荐几个不错的网站

≪ Previous: nanoSoft nanoCAD СКС v11.0.5040.5040

JetBrains Rider 2020.1 | 672.8 Mb

Rider helps you develop .NET, ASP.NET, .NET Core, Xamarin, or Unity applications on Windows, Mac, or Linux. It provides rich editing support and code insight for languages used in .NET development, from C#, VB.NET, and F# to ASP.NET Razor syntax, JavaScript, TypeScript, XAML, XML, HTML, CSS, SCSS, JSON, and SQL.Rider 2020.1现在默认在macOS和Linux上在.NET Core运行时上运行后端，并提供Xamarin Hot Reload和动态程序分析。它引入了一种简单的方法来配置编辑器的严重性，并增加了对整数值的数据流分析以及更快的代码完成速度。调试窗口已被重新处理，并且提取类重构和覆盖率过滤器现在可用。

Languages and project types
Rider lets you open, edit, build, run and debug most kinds of .NET applications: desktop, web, libraries, services (with a notable exception of UWP applications). Applications that target Mono, such as Unity and Xamarin, are also supported, as well as the latest and greatest .NET Core applications.

Rider supports a lot of languages used in .NET development, including C#, F#, VB.NET, ASP.NET (both ASPX and Razor view engines), XAML, XML, JavaScript, TypeScript, JSON, HTML, CSS, SCSS, LESS, and SQL.

ReSharper + IntelliJ platform
Rider uses UI and multiple features of the IntelliJ platform, which powers IntelliJ IDEA, WebStorm, and other JetBrains IDEs. It's cross-platform, familiar to millions of developers, and provides core functionality such as VCS and database support.

On top of that, we add ReSharper features: navigation and search, refactoring, code inspections, quick-fixes, and so on. We have spent 10+ years building a feature set that helps read, write and navigate large .NET codebases, and all this is now available to Rider users.

Designed to be smart and fast
Rider isn't jammed into a 32-bit process, which helps it gain deep insight into your code while still being responsive. Rider opens (and reopens) most solutions with almost zero latency. External changes to solution? Switching Git branches? Not a problem: Rider catches up quickly.
新功能

后端在.NET Core运行时上运行
向Rider .NET Core版打个招呼！默认情况下，后端最终在macOS和Linux上的.NET Core运行时上运行，而不是在Mono运行时上运行。您会立即注意到：

更好的性能。
较低的内存占用量。
NuGet恢复现在是多线程的（不是像Mono那样的单线程）。这意味着，如果您具有4个逻辑核心的CPU，则速度快4倍；如果您具有8个逻辑核心的CPU，则速度快8倍……您就明白了。
并拆除了其他许多Mono限制。
顺便说一下，当前的.NET Core版本是最新的也是最出色的3.1，与3.0版本相比，它在性能上有很多改进。

请注意，目前没有Windows支持，只有macOS和Linux。我们计划在今年晚些时候添加Windows支持。

您是否想了解有关从Mono到.NET Core过渡的更多信息，并查看性能图表？查看此博客文章！

如果您在.NET Core上运行的Rider后端遇到任何问题，并且想要移回Mono运行时，请选择“帮助” |“替代”。将IDE运行时切换到Mono。如果您有任何问题，请别忘了告诉我们。

Xamarin热装
Xamarin热装
Xamarin Hot Reload的初始支持在这里！现在，Rider会在设备或模拟器上调试时自动将Xamarin Forms XAML中所做的更改应用于应用程序，而无需重建和重新部署整个应用程序。

请注意有一个限制：如果带有Rider的PC /笔记本电脑和iOS设备不在同一个WiFi网络中，则即使iOS设备通过USB连接到PC /笔记本电脑，热重加载也无法工作。

除此之外，Xamarin支持得到了一个重要修复：在iPhone XS Max设备上运行Xamarin.iOS项目时，不再出现“无效目标体系结构'arm64e'”错误。

查看博客文章以获取更多更新。

动态程序分析（DPA）
动态程序分析（DPA）
我们很高兴介绍动态程序分析。每次在Rider中运行项目时，DPA都会开始收集内存分配数据。关闭应用程序后，DPA将向您显示检测到的问题的列表：关闭以及分配给大型和小型对象堆。很棒的是，您无需启动任何“性能分析会话”并获取快照。照常工作，所有数据都将在后台收集，而开销几乎为零。在各种实际解决方案上测试DPA的速度仅降低了0％至2％。

请注意：DPA仅在Windows上可用，并且您不需要单独的许可证即可激活它。

了解更多信息：通过动态程序分析自动检测应用程序中的内存问题

整数值的数据流分析
整数值的数据流分析
此版本的Rider引入了一种新型的代码分析，以跟踪应用程序中整数值的使用。这种新的分析类型跟踪所有int局部变量的值如何变化，并验证对此类变量的所有常见操作的正确性，以检测无用的或可能错误的代码段。即，它会警告您：

关系/平等运算符总是给出正确或错误的结果。
启发式无法访问的开关案例将检查int值。
毫无意义的算术运算，例如乘以1，加0等。
可能的int溢出。
可能除以0。
为了提高分析的准确性，我们还添加了两个新的JetBrains.Annotations属性，它们用于类型成员和int类型的参数：[NonNegativeValue]和[ValueRange（from，to）]。这些属性指定特定int成员的值在运行时如何变化。

Unity支持
Unity支持
我们在内存使用率和资产索引编制速度方面进行了重大改进。现在，Rider会在查看资产之前为所有代码建立索引，这意味着所有生产力功能（例如代码完成，突出显示和检查）都可以比以前更快地使用。加载解决方案后，资产索引将继续，同时您将继续工作，一旦建立索引，Rider将会发现用法，甚至在资产内部重命名。当然，一旦完成，索引将不断更新，仅查看新更改的文件。
资产索引现在也变得更加智能。它了解嵌套和Variant预制中的代码用法，并显示ScriptableObject和序列化字段值的用法。
单元测试发现现在可以更好地与Unity项目一起使用，而Rider会自动在项目中查找所有“编辑”模式和“播放”模式测试。
我们添加了一项新的性能检查，“将锯齿状的阵列比多维阵列更可取”，这表明在热路径中性能更好。这是一个微优化，因此仅在性能至关重要的上下文中才建议使用，例如Update方法或从Update调用的任何内容。
Rider将不再在Unity pr的代码完成中建议Boo.Lang.List或System.Diagnostics.Debug
When you edit code, our topmost priority is to make sure that you type as fast as your fingers are trained to, not only as fast as the IDE can process your input.

System requirements:
Operating system (64-bit distributions only):
Microsoft Windows 10/8.1/7 (.NET Framework 4.6.1 is required)
The strong-name bypass feature must not be disabled
Processor: min. Intel Core 2 Duo 2GHz
Memory: min. 4 GB / recommended 8 GB or higher
Disk: min. space: 2,5 GB using SSD instead of HDD is recommended for optimal performance
Screen: 1024x768 minimum screen resolution

Home Page - https://www.jetbrains.com/

(回复可见内容)

使用方法:
0. 先下载压缩包解压后得到jetbrains-agent.jar。
    下载页面：https://zhile.io/2018/08/17/jetbrains-license-server-crack.html
1. 启动你的IDE，如果上来就需要注册，选择：试用（Evaluate for free）进入IDE。
    如果你的IDE试用已过期可以使用reset_eval文件夹内的脚本重置一下。
2. 将 jetbrains-agent.jar 拖进IDE窗口（或者当作IDE插件安装），点 "Restart" 按钮重启IDE。
    （事实上你拖 jetbrains-agent-latest.zip 进去IDE窗口也没问题）
3. 在弹出的JetbrainsAgent Helper对话框中，选择激活方式，点击安装按钮。
4. 重启IDE，搞定。
x. 支持两种注册方式：License server 和 Activation code:
    1). 选择License server方式，地址填入：https://fls.jetbrains-agent.com （HTTP也可用，网络不佳用第2种方式）
    2). 选择Activation code方式离线激活，请使用：ACTIVATION_CODE.txt 内的注册码激活

↧

每天两贴两电魂

April 18, 2020, 6:45 pm

≫ Next: 赚电魂，连续灌水

≪ Previous: 推荐几个不错的网站

凑着凑着就齐活了

↧

赚电魂，连续灌水

April 18, 2020, 6:43 pm

≫ Next: EXE加密 9.1 - 固定机器码

≪ Previous: 每天两贴两电魂

唉顶顶顶顶顶顶

↧

EXE加密 9.1 - 固定机器码

April 18, 2020, 5:09 pm

≫ Next: PHP简猿影视源码v1.1 （影视站源码）

≪ Previous: 赚电魂，连续灌水

EXE加密 9.1 - 固定机器码
------------------------

原始软件:
> EXE文件加密器9.1
http://bbs.sdbeta.com/read-htm-tid-271289.html

只支持 9.1 所生成的文件；如果有加壳亦可以尝试。

其它修改:
  - 过了一部分限制的检测，未测试是否有效亦或是有暗桩。

使用方法:
1. 启动 [EXE文件加密 9.1 - 固定机器码.exe]
   如果提示需要管理员权限请放行。
2. 选择加密的程序。
3. 如果有询问，请键入已知序列号的机器码。
4. 程序将正常执行，并显示新的机器码。

注册表清理:
- 在注册表 [HKCU\Software\jixun66@吾爱破解\EXE文件加密器 9.1]
  可以找到储存的机器码信息以及上一次选择的文件信息。

本帖包含的部分附件只能访问社区查看

↧

PHP简猿影视源码v1.1 （影视站源码）

April 18, 2020, 5:04 pm

≫ Next: Autodesk Vault Products 2021

≪ Previous: EXE加密 9.1 - 固定机器码

起初看着界面很好看,就改了一下,然后就成这样了。
说明,首页数据获取播放资源不准确，是通过模糊搜索所得。
可以修改成ok资源网的数据。

测试版v1.1：有大神优化二改一下,我技术还未过关,继续深造PHP,学习新的技术再出新版！╯︿╰
代码遇到的问题：
1.爬取豆瓣api出现IP限制,频繁了
2.ok资源网的api采集时间太久了。

本帖包含的部分附件只能访问社区查看

↧

Autodesk Vault Products 2021

April 19, 2020, 6:57 am

≫ Next: 新人报道

≪ Previous: PHP简猿影视源码v1.1 （影视站源码）

Autodesk Vault Products 2021 | 13.0 Gb
Languages: English, Čeština, Français, Deutsch, Magyar, Italiano, 日本語, 한국어,
Polski, Português, Русский, Simplified 中文, Traditional 中文, Español

The Autodesk Vault development team is pleased to announce the availability of Vault Products 2021. In the new release, has added numerous new features and enhancements. Many of these are in response to user feedback, so never forget the power of adding your ideas to the Idea Station.

release info

Vault Basic Client 2021
Vault Basic Server 2021
Vault File Server 2021
Vault Professional 2021
Vault Professional Client 2021
Vault Workgroup 2021
Vault Workgroup Client 2021

Vault 2021 Language Packs
What’s New in Autodesk Vault 2021

Autodesk Vault 2021 continues to deliver on your feedback from live events, Autodesk Ideas, and the Vault Beta community with new customer-driven enhancements and features.

Whether you’re just getting started with Vault, or you’ve relied on the product data management (PDM) software for years, this post will help you understand what’s new in Vault 2021.

Here’s a summary of the productivity-boosting functionality you can expect:

- Smart Duplicate Reduction
- Productivity for CAD Users
- More Efficiency for Administrators

Smart Duplicate Reduction in Vault 2021

First seen in Vault 2020.2, the new Duplicate Search feature enables you to easily run a 3D geometric search for parts, so you don’t waste time and effort documenting, releasing, and managing duplicates. This feature is a huge new benefit for users. Unlike other PDM systems in the market, you don’t have to pay hidden fees or anything extra for a 3rd party add-on for geometric search. Autodesk has included its powerful geometric search feature within Vault Professional to add more value for users through increased productivity and cost savings.

Save thousands of dollars each year with new Duplicate Search feature

For example, if you’re an Inventor user and frustrated with data duplication issues in your company, imagine the value of running a search on a part that doesn’t rely on a part number or part name. Duplicate Search uses geometry to show you all the duplicate parts in your Vault. Reuse the correct part – delete duplicates – save thousands of dollars in wasted time and effort.

This feature alone is a business case for using Vault Professional. It more than pays for itself, giving you a quick return on investment as well as new capabilities. One of the many reasons you get more when subscribing to Autodesk software.

Vault 2021 also includes a Duplicates Dashboard that gives you the ability to create and export a report on duplicate part files. The dashboard can show you a ratio of duplicate parts in your Vault and help you identify and reduce duplicates. Again, Duplicate Search and Duplicates Dashboard are features that will save you a lot of time and money and worth exploring in Vault Professional.

Vault 2021 Productivity for CAD Users

When using Vault 2021 as part of your Inventor design workflows, you will notice several improvements that provide better overall design experience and increase productivity. Here are some of them:

Out-of-date files filter

Vault 2021 has a new out-of-date filter in the Inventor’s Vault browser. When enabled, the browser filters out all out-of-date files from the tree view.

Inventor and Revit interoperability

Vault 2021 supports the Inventor and Revit interoperability introduced in Inventor 2021. When collaborating on Civil, and AEC projects, Vault 2021 can now work with Revit files that have been linked into your Inventor models from your local network drive, or via BIM360 docs.

Unused document detection

Vault 2021 can help you detect and clean up unused files that are no longer required and prevent unused files from being released. A new property has been added to help identify orphaned files. The ‘Has Parent Relationship’ property is TRUE for files that are being used and FALSE for files that are no longer being used.

You can use this new property as a filter, or in a saved search, or during a state change to automatically archive orphaned components.

Copy Design

For Copy Design in Vault 2021 Workgroup and Professional, rulesets are now stored on the server. This makes it possible for administrators to manage Copy Design rulesets globally and provide standard settings for Copy Design behavior.

Additionally, new functionality in Copy Design makes it possible to copy property values from the original file to any user-defined property in the new file. For example, the original part number, or source drawing file.

Communications for Engineering Change Orders

To improve communications when progressing through an Engineering Change Order, support has been added to edit the automatically generated email template for ECOs.

More Efficiency for Administrators in Autodesk Vault 2021

For Vault administrators, a new option helps you to distinguish when you are logged in as an admin, by allowing you to set the color of the status bar inside the Vault client.

New data purge control for lifecycle states

In prior releases, changes to the purge control for lifecycle states would only apply to new file versions. There is now a new option to apply purge control changes to historical data as well.

Higher job queue maximum display number

You can now set the number of jobs displayed in the Job Queue using a new option in the Integrations tab of the Global Settings dialog box. When jobs are submitted to the Job Processor’s Job Queue, previously only the first 1000 jobs were displayed. In Vault 2021, an administrator can configure the Job Queue’ maximum display number from 1000 to 100000.

More granularity for user settings to increase collaboration

One of the most valuable new capabilities in Vault 2021 is more granularity for user settings to improve internal and external collaboration. Object-based and lifecycle state-based security and Custom Roles now include download permission.

Previously, any user or group with the Read permission could download the file. Now, it is possible to grant users access to read folder content, file properties, and ‘where used’, while preventing them to download the actual files. This capability opens new channels of collaboration workflows with other departments, sites, and external partners.

For example, in the diagram below, ‘Team 1’ has access to read and download all the files; ‘Team 2’ has access to read files in ‘Folder A’, but no access to download them, and the ‘Shopfloor Worker’ has access to read files in ‘Folder A’ and ‘Folder B’, but no access to download them.

Additionally, new functionality for User Management enables you to hide or show disabled users using the option in the View drop-down.

Autodesk Vault 2021 What's New

Autodesk Vault data management software is specifically written to help companies and professionals involved in BIM, construction, engineering or digital prototyping workflows effectively manage their design data.

Autodesk Vault 2021 delivers a powerful set of document management tools with direct links from raw CAD data which can then be made available to the global enterprise and non- CAD users where required, including integration with Microsoft SharePoint, Outlook (and other office applications) and also external ERP systems.

Autodesk Vault is available in a variety of versions to meet the differing needs of individual company's data management requirements. These include:

- Vault Basic which allows you to organise, manage and track data creation, simulation and documentation
- Vault Professional which allows you to integrate advanced functionality and features with business applications
- Vault Workgroup which allows you to scale up to multi-site installations and wider scale sytem intergration.
- Vault Office which allows non-cad users to participate in data management workflows.

Managing vast amounts of data, delivery of complex projects and working in teams often generates a number of challenges which may lead to errors or cause a project to miss essential milestones, but many of these challenges can easily be overcome simply by implementing Autodesk Vault as your data management solution.

In the overview and videos below we will look at some of the common daily challenges designers are faced with and how Vault can help you overcome them and streamline your design processes.

Autodesk helps people imagine, design and create a better world. Everyone—from design professionals, engineers and architects to digital artists, students and hobbyists—uses Autodesk software to unlock their creativity and solve important challenges.

Product: Vault Products
Version: 2021 *
Supported Architectures: x64
Website Home Page : www.autodesk.com
Language: multilanguage **
System Requirements: PC ***
Supported Operating Systems: ***
Size: 13.0 Gb

** Vault 2021 Language Packs

Vault 2021 is released as a single language pack installation regardless of the medium used for delivery. However, downloading and installing additional Vault Client language packs will enable you to run Vault Client in languages other than that initially received. Use the Vault language pack installation to install language pack for Autodesk Vault 2021.

Each language pack creates a shortcut for Vault Client in the Start menu which loads a different user interface language upon start up. The general product launch icon remembers the current language as the last language used and launches Vault Client again using that language.

*** System Requirements:

Vault Server Requirements

Server Operating System

Operating System
- Windows Server 2016 Standard, Datacenter
- Windows Server 2019 Standard, Datacenter
- Microsoft Windows 10 Professional, Enterprise (Vault Basic only)

Database Servers

Single Site
- Microsoft SQL Server 2014 Express, Standard, Enterprise (CU4 for 2014 SP3)
- Microsoft SQL Server 2016 Express, Standard, Enterprise (CU10 for 2016 SP2)
- Microsoft SQL Server 2017 Express, Standard, Enterprise (CU17)
Full Replication
- Microsoft SQL Server 2014 Standard, Enterprise (CU4 for 2014 SP3)
- Microsoft SQL Server 2016 Standard, Enterprise (CU10 for 2016 SP2)
- Microsoft SQL Server 2017 Standard, Enterprise (CU17)

CPU

Single Site
- Intel i5 or AMD equivalent Processor, 2 GHz or higher (Minimum)
- Intel Xeon E7 or AMD equivalent Processor, 3 GHz or higher (Recommended)
Full Replication
- Intel Xeon E5 or AMD equivalent Processor, 2 GHz or higher (Minimum)
- Intel Xeon E7 or AMD equivalent Processor, 3 GHz or higher (Recommended)

Disk Space

Single Site
- 100 GB disk space (Minimum)
- 200 GB disk space (Recommended)
Full Replication
- 300 GB disk space (Minimum)
- 500 GB disk space (Recommended)

Vault File Server Requirements

Operating System
- Windows Server 2016 Standard, Datacenter
- Windows Server 2019 Standard, Datacenter

CPU

File Replication
- Intel Xeon E5 or AMD equivalent Processor, 2 GHz or higher (Minimum)
- Intel Xeon E7 or AMD equivalent Processor, 3 GHz or higher (Recommended)

Memory

File Replication
- 16 GB RAM (Minimum)
- 32 GB RAM (Recommended)

Disk Space

File Replication
- 300 GB disk space (Minimum)
- 500 GB disk space (Recommended)

Vault Client Requirements

Software

Operating System
- Microsoft Windows 10 Professional, Enterprise
Browser
- Internet Explorer 11

Hardware

CPU
- Intel i3 or equivalent AMD® Processor, 1.6 GHz or higher (Minimum)
- Intel i7 or equivalent AMD® Processor, 3 GHz or higher (Recommended)
Memory
- 4 GB RAM (Minimum)
- 8 GB RAM (Recommended)
Disk Space
- 6 GB disk space (Minimum)
- 10 GB disk space (Recommended)

Thin Client

Browser Compatibility

Browser
- Internet Explorer 11
- Microsoft Edge
- Chrome

本帖包含的部分附件只能访问社区查看

↧

新人报道

April 19, 2020, 6:46 am

≫ Next: Ability Office Professional 10.0.1

≪ Previous: Autodesk Vault Products 2021

前辈们多多指点

↧

Ability Office Professional 10.0.1

April 19, 2020, 5:27 am

≫ Next: MAGIX Samplitude Pro X5 Suite 16.0.0.25 (x64)

≪ Previous: 新人报道

Ability Office Professional 10.0.1 | 72 Mb

Ability Office Professional offers 5 fully featured applications in one affordable, powerful and above all compatible office suite, specifically designed for the needs of businesses everywhere. Get straight to work with a completely familiar user interface that requires absolutely no retraining. Create, load from, edit and save to Microsoft® Office *.doc and *.docx, *.xls and *.xlsx, *.ppt and *.pptx, plus *.mdb files, Adobe® PhotoShop *.psd files, together with all other mainstream graphical formats.

Windows 10 and Microsoft® Office compatible.
Ability Office Professional — the cost-effective, easy-to-use alternative to Microsoft® Office. Includes 2 licences for your personal commercial use. Per seat site licences are also available for larger enterprises or educational/charitable establishments.

Write - Word Processing
- Compatible with Microsoft® Word
- PDF or XPS export for your documents
- AutoSpelling, AutoCorrect & AutoText
- Vector Drawing layer, Autoshapes, Linked Frames & Tables
- Indexing, TOC, Sections, Task Panes & WriteFX effects

Spreadsheet - Spreadsheets
- Compatible with Microsoft® Excel
- PDF or XPS export for your spreadsheets
- Pivot Table Wizard, Vector Drawing layer, Autoshapes
- Over 250 built-in functions & 25 different chart types
- Set Print Area, Page Break Previews, Cell Property Pane

Presentation - Slideshow Presentations
- Compatible with Microsoft® PowerPoint
- PDF, XPS, HTML Web-Album & Image export for your slides
- Thumbnail Outliner, Slide Sorter & Master Slide View
- AutoShapes, Pictures, Charts & WriteFX effects
- Spell Checking & Thesaurus

Database - Database Management
- Compatible with Microsoft® Access 2003 and earlier
- PDF or XPS export for your database reports
- Advanced Query Designer and Relationship Manager
- Automatic or Wizard generation of Forms and Reports
- Interactive Mail-merge with Write & Spreadsheet

Write — Microsoft® Word compatible word processing
Gives you everything you need to create, edit and produce better-looking letters, reports, quotations, memos, mailings and newsletters. Write has all the features that you would expect from any top quality word processor — spell checker and thesaurus, bulleted and numbered lists, frames, tables, autocorrect, autospell, headers and footers, numerous paragraph and font options, interactive rulers, intelligent drag and drop editing, short-cut menus for easy text revision, the capacity to include graphics, spreadsheets and charts, plus a whole host of other essential features. Write also supports a wide range of file formats for export and import and is compatible with *.doc and *.docx file formats (Microsoft® Office 2019 and earlier).

Spreadsheet — Microsoft® Excel compatible spreadsheet
The perfect tool for managing all your numerical data, whether business information, home finances, complicated calculations or homework problems. To help you make sense of your figures, Ability incorporates all the essential elements users need from a spreadsheet program, as well as a range of advanced features — such as pivot tables and macros — to make working with numerical data as easy and clear as possible. Compatible with both *.xls and *.xlsx file formats (Microsoft® Office 2019 and earlier).

Presentation — Microsoft® Powerpoint compatible slideshow presentation
The ideal application for creating professional slideshow presentations, with a wide range of visual and text effects ensuring that your message is delivered with maximum impact. Make your presentations as simple or as sophisticated as you need with the combination of Ability’s familiar design interface and rich creative feature set enabling production of the highest quality presentations. Compatible with both *.ppt and *.pptx file formats (Microsoft® Office 2019 and earlier).

Database — Microsoft® Access compatible database
A powerful data management system that is perfect for storing and analysing structured data or information, including address books, inventories, customer and product lists, medical records, and any other data that can be usefully tabulated. Create and maintain detailed reports that display information filtered, sorted and grouped according to your precise needs and so make your analysis and decision-making easy. Compatible with *.mdb file formats (Microsoft® Office 2003 and earlier).

Photopaint — Adobe® Photoshop compatible photo and graphics editor
A feature-rich photo and image editor that will instantly feel familiar, both in interface and functionality, to users of Adobe® Photoshop. Its fundamental components include paint tools, colour palettes, brushes, selections, special effects filters and layers, delivering you the ability to create the exact graphical effects and edits required. Compatible with both Adobe® Photoshop *.psd and all other mainstream graphics file formats.

Save as PDF
As a major added benefit, create universally accepted Adobe® PDF files from within any relevant Ability application, allowing secure delivery of original documents and making it quick and easy to publish documents online.

Minimum System Requirements:
- Windows 10, 8, 7, Vista
- PC suitable for running these operating systems
- 150Mb hard disk space

Home Page - https://www.ability.com

(回复可见内容)

↧

MAGIX Samplitude Pro X5 Suite 16.0.0.25 (x64)

April 20, 2020, 12:47 am

≫ Next: SolidCAM 2020 / InventorCAM 2020 Documents and Training Materials

≪ Previous: Ability Office Professional 10.0.1

MAGIX Samplitude Pro X5 Suite 16.0.0.25 (x64) Multilingual | 1 GB

Samplitude Pro X provides recording and mixing engineers with practical functions that revolutionize the standard DAW workflow. Edit in realtime, during recording. Apply effects in a custom way to individual clips. Visualize volume, frequency and phase information for selected tracks. Use batch processing for the automated editing of multiple files simultaneously.

Brand new functions
New in Samplitude Pro X5 Suite: ARA2 integrates Melodyne and SpectraLayers Pro more seamlessly than before, MIDI Polyphonic Expression supports modern controllers such as ROLI Seaboard and a new section is included for simplifying monitoring. The tempo track functions enables centralized control of changing tempo and time signatures, Automation Shapes creates smooth curves and Convology XT Complete offers vintage reverb. Additional instruments for captivating sounds, the full coreFX Suite with essential effects and a bonus audio software bundle are included in the new Samplitude Pro X5 Suite.

Highlights
- New! ARA2 supports the latest versions of Celemony Melodyne essential and others
- New! MIDI Polyphonic Expression for additional parameters per note
- New! Monitoring Section for switching between monitoring paths
- New! Automation Shapes for predefined curves
- New! WaveColor for spectral waveform display
- New! Dedicated Tempo Track function for automating tempo changes
- New! Convology XT Complete with unlimited vintage reverb units (2965 impulse responses)

New! Monitoring Section
Say goodbye to meter-long cable connections and expensive routing hardware – the new Monitoring Section in Samplitude Pro X5 offers unprecedented flexibility. Set up multiple monitoring paths and load them with effects. Play back your configurations and integrate a talkback mic if you like – this can be done easily using the mouse or shortcuts.

New! ARA2 support
A second-generation ARA interface allows for more comprehensive switching between Samplitude Pro X5 and ARA-compatible plug-ins. Audio data can be swapped out faster and allows for more efficient editing in realtime. Time-consuming transfers are a thing of the past when integrating Melodyne, since audio events can be opened directly here. In addition, ARA2 simplifies simultaneous editing of multiple tracks and clean transitions between clips without crossfades.

New! Tempo Track
Tempo now has its own track. Use automations to create elegant transitions between slow and fast passages. Set additional buttons as helpful markers for beat and tempo change.

New! MIDI Polyphonic Expression
With MIDI Polyphonic Expression (MPE for short), discover the future of MIDI operation. MPE assigns each note a dedicated MIDI channel, which allows for parallel modulation simultaneously and independently of each other. This way, compatible controllers such as the ROLI seaboard can output their full potential. Want to apply pitch bend to a solo or bring down harmonies using sustain? It's all possible with MPE.

Full control, everything in view
New options for automation are front and center in Samplitude Pro X5. Advanced tools for visualization offer users a better insight into their audio material.

System Requirements:
- Windows 10, Windows 8 (64-bit)
- Processor: 2 GHz
- RAM: 4 GB
- Graphics card: Onboard, minimum resolution 1024 x 768
- Available drive space: x GB for program installation, 20 GB for Samplitude Pro X5, 100 GB for Samplitude Pro X5 Suite
- Sound card: Onboard

Home Page - https://www.magix.com/

↧