Visual MODFLOW Flex汇集了用于地下水流动和污染物运输的行业标准代码，必要的分析和校准工具以及在单个环境中提供出色的3D可视化功能。
Visual MODFLOW Flex 7.0的可用性和其他增强功能
地表水建模（SFR2）
支持有限差分模型中的表面流和路由（SFR2）软件包：
- 新的地表水工作流程，用于开发和定义溪流，引水和湖泊的互联网络
- 用于数字化地表水网络的GIS编辑功能，包括添加，删除，编辑，删除，捕捉，拆分，翻转
- 溪流和湖泊的地表水网络属性编辑对话框
- 翻译后的SFR2程序包，包括湖泊连接和栖息流下方的一维垂直非饱和流
井和多节点井（MNW1 / 2）
支持有限差分模型中的多节点阱（MNW1 / 2 / I）软件包：
- 在支持的油井模型（WEL / MWN1 / MNW2）之间动态切换
- 导入和编辑MNW1 / 2软件包中支持的井头信息，包括压头损失，井表皮和泵约束参数
- 对非垂直井（也称为斜井或水平井）的支持：
- 通过绘图或分配井口点来定义概念井
- 对油井参数和进度表进行多选编辑
校准
- 导入和/或设置目标残差以进行水头/浓度观测
- 在“视图地图”工作流步骤中按图层或观察组显示相对于目标残差的残差空间分布
- 观测值的数目作为统计值包含在“计算的”与“观测的”校正图下方
模型运行
- 流动和运输模型的运行结果以图形方式实时显示，包括有效的求解程序包设置提供的全局残留误差和最大压头/浓度变化。
- 修改后的MODFLOW-USG可以将包括全局残差在内的求解器进度实时报告给显示控制台
模型导入
- 导入MODFLOW模型时，您现在可以为网格定义偏移和旋转角度，以将模型设置为世界坐标。
- 导入MODFLOW-NWT模型和支持的软件包
- 导入文件MODFLOW文件时，将在模拟过程中引起问题的无效值（例如负电导率）替换为项目默认值。
Visual MODFLOW Flex brings together industry-standard codes for groundwater flow and contaminant transport, essential analysis and calibration tools, and stunning 3D visualization capabilities in a single environment.
Usability and Other Enhancements of Visual MODFLOW Flex 7.0
Surface Water Modeling (SFR2)
Support for the Surface Flow and Routing (SFR2) Package in Finite Difference models:
- New Surface Water workflow to develop and define connected networks of stream segments, diversions, and lakes
- GIS editing capabilities for digitizing the surface water network including add, remove, edit, delete, snap, split, flip
- Surface water network attribute editing dialog for streams and lakes
- Translated SFR2 package including lake connections and 1-D vertical unsaturated flow beneath perched streams
Well and Multi-Node Well (MNW1/2)
Support for multi-node well (MNW1/2/I) packages in Finite Difference Models:
- Dynamically switch between supported well models (WEL/MWN1/MNW2)
- Import and edit well information including head loss, well skin, and pump constraint parameter supported in MNW1/2 packages
- Support for non-vertical wells (also known as deviated or horizontal) wells:
- Define conceptual Wells by drawing or by assigning wellhead points
- Multi-select editing of well parameters and schedules
Calibration
- Import and/or set target residuals for Head/Concentration Observations
- Display spatial distribution of residuals relative to target residuals by layer or observation group at the View Maps workflow step
- The number of observations is included as a statistic below Calculated versus Observed calibration charts
Model Runs
- Flow and Transport model run results are graphically displayed in real time including the global residual error and the max head/concentration change, as supplied by the active solver package settings.
- Modified MODFLOW-USG to report solver progress in real time to the display console including global residual error
Model Import
- When importing a MODFLOW model, you can now define an offset and rotation angle for the grid to set the model in world coordinates.
- Import MODFLOW-NWT model and supported packages
- When importing files MODFLOW files, invalid values that will cause issues during a simulation (such as negative conductivities) are replaced with project default values.
官网首页 – HomePage: https://www.waterloohydrogeologic.com/products/visual-modflow-flex/
软件语言 – Language: English
文件大小 – FileSize: 560 Mb
运行平台 – Operating Systems:Windows 10.x 64Bit